DVTELL Ioimage trk-101 Manual de instalación descargar pdf (Pagina 23)

Installing and Connecting the Unit

3.2.4 Connecting the Video Source (Camera) to the Unit

The unit is designed to accept a composite video signal (1Vp-p) from an analog PTZ camera. Video

connections should use a 75Ω cable and should not be longer than 30 meters (98 feet).

To connect the video source to the unit

1. Securely connect the video cable BNC connector to the analog video output of the camera or

video source.

2. Connect the other cable end to the VIDEO IN connection on the video connection panel of the

unit. See Figure 4: trk-101-P Video Connection Panel (page 4).

To set the unit’s video standard via its web interface

1. Enter the IP address of the unit in a browser. The unit’s Login window opens.

2. Login to the unit by entering your user name and password. The default user name and

password are both “admin”. The web interface opens.

3. If your computer requires ActiveX installation, install it now.

4. From the Live View window, access the Camera Setup by clicking Setup > Camera >

Streaming. The Streaming window opens.

Figure 11: Web Interface Streaming Window

5. In the Video Standard field, select PAL or NTSC.

6. Click Apply to save the setting.

Note:

If the video standard is changed, all analytic settings will be deleted.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 34 35

Sin comentarios

DVTELL Ioimage trk-101 Manual de instalación Pagina 23